Source for Fuel Pressure Gauge Adapter

Started by tmsmini, May 13, 2021, 07:28:05 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

tmsmini

Anyone have a source for a fuel pressure gauge adapter like this in the US:
https://www.carbuilder.com/us/fuel-pressure-gauge-inline-adapter-for-6mm-hose

I am looking for a 1/4 inch adapter. I have a gauge and adapters I use for the injected cars, but I would like to test the output of the SU pump.

I can find lots of 5/16 adapters and versions with AN threads. Something with three 1/8 NPT female ports would do as I hopefully can find either 6 mm or 1/4 hose bard to 1/8 NPT somewhere.

It is not for a permanent installation.


tmsmini

yes, that will do.
I looked at our local hardware store, but did not think to check the orange place.
Also eventually found them at Summit as well
https://www.summitracing.com/parts/vpe-10860

Red Riley

Yeah, brass is brass.
Grainger supply or McMaster Carr are also great sources for pretty much anything you can think of. Electrical, mechanical, hardware, etc. I even bought my door seals from McMaster Carr.